Ενεργειακό Αερόθερμο Τζάκι ECO iLINE 5161 L/R - KFD
Ενεργειακό τζάκι της πολωνικής εταιρείας KFD.
| Κατασκευαστής |
|
|---|---|
| Εγγύηση | 5 χρόνια |
| Υλικό Εστίας | Βερμικουλίτης |
| Σχήμα Τζακιού | Γωνιακό |
| Ενεργειακή Απόδοση | Α+ |
| EcoDesign | Ναι |
| Μέγιστη Θερμική Ισχύς (kW) | 15.1 - 20 kW |
| Απόδοση | Τουλάχιστον 80% |
| Υλικό Κατασκευής | Χάλυβας |
| Πλάτος τζαμιού | έως 69 cm |
| Βεντιλατέρ | Όχι |
| Διαθεσιμότητα | Προπαραγγελία |
Ενεργειακό τζάκι της πολωνικής εταιρείας KFD. Σύγχρονη κατασκευή, υψηλής θερμικής απόδοσης, ιδανικό για τα σύγχρονα σπίτια, ικανό να καλύψει τις ανάγκες θέρμανσης.
Χαρακτηριστικά:
- Ενεργειακή απόδοση: Α+
- Ονομαστική ισχύς: 11,5 [kW]
- Εύρος ισχύος θέρμανσης: 7,0 - 16,0 [kW]
- Ονομαστική θερμική απόδοση: 82,5 [%]
- Εκπομπές CO στο 13% O2: 0,09 [%] 1162 [mg / Nm 3 ]
- Εκπομπή ρήπων σε 13% O2: 19 [mg / Nm 3 ]
- OGC στο 13% O2: 51 [mg / Nm 3 ]
- Εκπομπή NOX σε 13% O2: 145 [mg / Nm 3 ]
- Θερμοκρασία καυσαερίων στην έξοδο: 235 [° C]
- Συνολικές διαστάσεις, ύψος x πλάτος x βάθος: 713x702x452 [χιλ.]
- Διαστάσεις πρόσοψης, πλάτος x ύψος: 702x563 [χιλ.]
- Διαστάσεις πλευρικής πρόσοψης, πλάτος x ύψος: ΟΧΙ
- Διαστάσεις μπροστινού γυαλιού, πλάτος x ύψος: 610x430 [mm]
- Διαστάσεις πλευρικού γυαλιού, πλάτος x ύψος: ΟΧΙ
- Μέγιστο μήκος ξύλων: 50 [εκ]
- Εσωτερική / εξωτερική διάμετρος καπνού: 180/200 [mm]
- Διάμετρος εισόδου αέρα: 100 * [mm]
- Βάρος: 115 [κιλά]
- Υπάρχει η επιλογή για μαύρη εσωτερική επένδυση
DURABILITY AND SAFETY
Double-jacket construction of ECO iLINE inserts is composed of a steel insert body and internal chamotte elements. Inner components of the fi rebox are high temperature resistant and are made of high quality refractory plates, with very good heat accumulation capacity. Thanks to these refractory panels, the fi rebox heats for several hours after the fi re is out. All parts inside the furnace that undergo wearing are easily accessible and their exchange is very simple. The external body of ECO iLINE inserts is made of steel and additionally is strengthen by over presses. Such construction guarantees reliability and operation safety, even at continuous burning.
HEAT AND ECOLOGY
All models of ECO iLINE inserts are equipped with a modern double combustion system. Additional air for combustion gets to the furnace through openings in special air channels, located at furnace corners. Air supplied through these channels is pre-heated. Elements, which in normal inserts would escape to a chimney, are afterburnt here. Thanks to this, heating parameters of ECO iLINE inserts are better and combustion is more ecological.
HIGHER HEATING EFFICIENCY
The special defl ector construction forces a longer circulation of combustion gas in the insert. Thanks to this, the insert effi ciency is higher (larger amount of heat from the same amount of burnt wood) and combustion is more ecological.
WATER HEAT EXCHANGER
EX models are equipped with water heat exchanger, where heating medium for central heating and hot water systems is heated. Location of the exchanger in the upper part of the furnace makes that heat recovery is more effi cient and we can also implement air (convective) house heating.
MAXIMAL VIEW OF THE FIRE
Attractive and almost not distinct door frame makes that one can see the most important thing – the fi re. Large windowed area in proportion to front surface makes that fi re is better visible. Ideal fi re image is possible thanks to combination of pyrolisis effect and proper air circulation inside the furnace.
PRECISE CONTROL
Smooth regulation of air inlet enables the control over intensity and speed of combustion.
DIRECT AIR INLET TO THE FURNACE
ECO iLINE inserts are equipped in a system of direct air supply from outside to the furnace – it is especially essential solution in case of modern, low energy buildings. Regulation of air inlet from outside and regulation of combustion speed (insert power) is done using only one regulator.
PRECISE LOCK
Door is blocked by a precise lock with a convenient handle. Hinges enable a precise regulation 8 of door opening.
INSTALLATION LEGS
Legs make the installation very easy and fast. This ensures precise height regulation and stability of the installation.
CHIMNEY DAMPER (option)
Chimney damper (option, not applicable for EX models) enables a precise regulation of draught in a chimney. In order to make operation more convenient, inserts have a door lock as not to be opened when a damper is closed. During maintenance operations, a damper can be easily disassembled from the inside of the insert.
Εκτίμηση μεταφορικών
